WQ50-10-12-0.75

Technical Specifications

Characteristics

It has the same outstanding performance as ordinary water pumps. 
It is available in a series of various models (with diameters ranging from 50 to 300), suitable for various applications. 
Special design, used for discharging large volumes of impurities. Additionally, it features a 4-pole motor, providing strong stirring force for the impurities. 
It has a load-limiting feature. Even with a large flow rate, it will not cause overload. 
The change in head has little effect on the flow rate. Even if the water level in the pit changes, the flow rate will not undergo significant variations. 
Built-in motor protector, which can prevent the motor from being damaged due to overload, jamming, phase loss, etc. 
With the loading and unloading devices installed, it becomes convenient to carry out operations such as installation, lifting, and maintenance inspections. 
The automatic transport type (DLA type) and the automatic alternate transport type (DLJ type) can start operating automatically once the power is connected. 
It can be equipped with a cutting knife device. (Limited to models 50DL5.4 and 50DL5.75) It adopts an elliptical suction inlet (with an aperture of less than 80mm) and a radial groove suction inlet (with an aperture of 100mm), which enhances the suction performance for fibrous impurities.